EchoMAP UHD2 72cv

TRADITIONAL 2D SOUNDER CHIRP

L'Echomap UHD 72cv is equipped with the traditional sounder CHIRPOne of the most innovative technologies on the market. This provides ideal detection down to a depth of 240m (manufacturer's data) thanks to its coverage CHIRP on a wider beam than usual.

• Denser information and sharper, high-resolution images
• Better target separation and sharper rendering of fish arches
• Improved bottom tracking and fish detection even at high speed

Frequency CHIRP 70/83/200 kHz

CLEARVÜ UHD TECHNOLOGY

ClearVü UHD technology is the most powerful on the market. It provides clear scanning images Ultra High Definition of everything going on beneath the water's surface. You'll be able to see submerged structures, fish and objects with pinpoint accuracy.

• See thermoclines: boundary between water layers and oxygen-rich zones.
• Fish identification: no room for interpretation, it identifies clearly.
• Reveal structures: wrecks, vegetation, bridge pillars, corpses-dead...

ClearVü UHD frequencies: 260/455/800 kHz

QUICKDRAW CONTOURS FUNCTION

Quickdraw Contours software creates your hD fishing cards in real time. It's now possible to create your own maps without any special knowledge.

With theEchomap UHD2 72cv, you can store the equivalent of 8000 km² of maps Quickdraw Contours with bathymetric curves displayed every 30 cm.

Download maps or share your own by connecting to WI-FI to the free ActiveCaptain app. Receive on-screen notifications of new updates to your echo sounder via the app.

WIFI AND CONNECTIVITY ECHOMAP UHD2

Visit Garmin Echomap UHD2 enables wifi connection of a smartphone to use the Active Captain application iOS and Android, but above all the connection of 2 probes Echomap UH2 between them to share the sounder view and user data.

With this system, you can, for example, have your 1st sounder connected to your sonar by cable at the stern, while a second sounder located at the bow will receive the sounder view of the 1st wireless via wifi allowing you to fish from all sides of the boat, while always keeping an eye on one of the screens.

The 2nd useful feature of wireless is the ability to share certain sounder settings, in addition to screen copy. Here's what you need to know: sensitivity, range and interference filter.

This means you can fine-tune these sounder settings on either screen. For other settings, however, you'll need to use your main screen.

The wifi connection also lets you share updates. So you can put an SD update card in your first sounder, launch the update and then, once it's complete, re-launch it for the 2nd sounder via wifi, without moving the SD card from one to the other.

⚠️ No map sharing via wifi. You'll need a map on each of the 2 fishfinders

THE BEST CARDS

L'Echomap UHD2 72cv gives you the best cards Garmin Navionics+ and Garmin Navionics Vision+. These include all the data Navionics, autoguiding technology and a host of other options. Use a microSD card (max. 32 GB) to store all your maps on your navigation system.

Thanks to Wi-Fi, pair your device with the free ActiveCaptain app and access OneChart to update, buy or download new maps.

MAIN POINTS :

• 7-inch screen
• Wifi compatible
• Technology CHIRP
• 500W HD sounder module-ID
• Resolution: 800 x 480 pixels
• Dimensions: 23.2 x 14.3 x 6.7 cm
• Integrated GPS/GLONASS 5Hz antenna
• MicroSD card slot (32 GB max)

BOX CONTENTS :

• 1 - Garmin EchoMap UHD2 72cv
• 1 - Pivoting and swivelling stirrup
• 1 - Flush-mounting kit
• 1 - GT20 probe-TM (according to Pack)
• 1 - Power / data cable
• 1 - PDF documentation