Pack Helix 10 G4N MSI+ + Mega Live Imaging probe

TRADITIONAL 2D SOUNDER CHIRP

The traditional sounder function uses CHIRP the high-frequency beam is wider than usual, enabling optimum detection at depths of up to 100m without any problems.

With CHIRP, benefit from:

• Denser information and sharper image at high resolution
• Better target separation and sharper rendering of fish arches
• Improved bottom tracking and fish detection even at high speed

MEGA TECHNOLOGY DOWN IMAGING+

The MEGA Imaging+ function pushes the performance of the Down Imaging and doubles the depth of use of the Mega Down Imaging.

Now you can explore depths at very high frequencies that were previously inaccessible... while retaining stunning image quality.

Frequencies :

• 455 kHz DI+ (435-535 kHz)
• 800 kHz DI+ (800-860 kHz)
• MEGA DI+ (1100-1200 kHz)

MEGA TECHNOLOGY SIDE IMAGING+

You can survey up to 60m on either side of the boat, i.e. 120m of mega-imaging scanning!

Mega Imaging+ lets you use the zoom mode in MSI+ view without loss of detail. You can zoom in up to six times, while retaining impressive image quality.

Rather than simply zooming in on the image, which distorts the pixels, the device recalculates the selected area.

Frequencies :

• 455 kHz SI+ (405-505 kHz)
• 800 kHz SI+ (780-840 kHz)
• MEGA SI+ (1050-1175 kHz)

AUTOCHART LIVE

The AutoChart Live function enables users to map and create bathymetry of any body of water for their own private use.

AutoChart Live software is pre-loaded with 8 hours of memory to create detailed bathymetric mapping of the seabed. This feature now also displays variations in vegetation and bottom hardness. Maps are created live on-screen as you prospect.

To increase the memory capacity of the AutoChart Live function, the autoChart card is required.

GPS

Visit Humminbird Helix 10 features a latest-generation WAAS GPS antenna for high accuracy. This means you'll be able to pinpoint your position with pinpoint accuracy and carry out your prospecting.

Simple to use and for reliable navigation, it features an extremely accurate built-in GPS antenna and detailed cartography.

A Micro SD card that can be used to display cards Navionics+ and SYLMAPS.

Please note that the navigation map is not supplied as standard.

DUAL SPECTRUM PROBE

This multi-this wide-beam frequency scanner has a scanning range of 140 to 240khz. It incorporates the best ceramics available. With a very low "Q" factor to protect the ceramics from unnecessary vibration, it delivers the clearest, most accurate image of the water layer.

The 180° narrow beam-240khz lets you optimize background detail and readability.

The two beams can also be combined to take full advantage of both frequency ranges.

DUAL SPECTRUM technology now equips all handsets Humminbird Helix G4N on DS, MDI & MSI models.

INTERCONNECT YOUR DEVICES

The Ethernet network lets you interconnect devices Humminbird with the greatest of ease.

Devices equipped with this feature can exchange data from the various sensors connected to the network (depth sounder, GPS antenna, radar, etc.).

All data is available on the screens, except for shared cartography.

From 3 devices or accessories, one Network hub is required.

MAIN POINTS :

• 10" display
• Bluetooth
• Waterproof IPX7
• NMEA2000 connection
• RMS power 1000W
• 2-year manufacturer's warranty
• Compatible with Ethernet networks
• Screen resolution: 1024 x 600 pixels
• Probe frequencies: 140/240 kHz

BOX CONTENTS :

• 1 - Screen Humminbird Helix 10 G4N MSI+
• 1 - SH transom sensor-A107T
• 1 - Mega Live Imaging probe (+ adapter cable)
• 1 - 360° Live probe boom - Eau Douce - 1 m
• 1 - Protective cover
• 1 - Screen mounting bracket
• 1 - 12V power cord
• 1 - PDF documentation