SH320 hydraulic bow thruster / Ø 300 mm

Hydraulic thruster for boats from 13 to 23 m with thrust from 270 to 320 kg

• Model: SH320/300TC
• Hydraulic power output: 17.4 kW / 23.3 Hp
• Max. power flow: 45.6 L/mm
• Max. pressure required: 279 bar
• Normal service max. thrust : 320 kg
• Severe service thrust : 270 kg
• Propulsion: Counter-rotating
• Hydraulic motor : 16 cm3
• Weight : 19,5 kg

PRO

The SH320 lets you apply only the power you need to perform your maneuver. Variable speed control eliminates the noise associated with standard on/off thrusters. With a dual configuration (front and rear), you also benefit from a convenient hold function that lets you set and leave the thrust level.

S-Link system

S-Link is a CAN-based control system used for communication between Sleipner products installed on a vessel.

• Compact, waterproof connectors
• Color-coded, keyed connectors for easy, correct installation.
• Different cable lengths, extensions and T-connectors make the system scalable and flexible to install.

IPC control system (Intelligent Power Control)

• Improves thruster reliability and safety. If the relay is blocked during operation, the thruster is automatically stopped.

Sealed gearleg

• The assembled gearleg is supplied pre-filled with oil. The propeller shaft is sealed by a ceramic/graphite mechanical seal for maximum reliability.

TC Twin Counter: Counter-rotation

• Two counter-rotating propellers provide maximum thrust, while maintaining good performance in relation to diameter. This type of propeller is used for larger thrusters to obtain maximum power.

Q-PROP propellers

• 5-blade propellers with asymmetrical (skew) profile. These new propellers deliver a thrust gain of around 5%, while reducing noise levels

Flexible installation

• Sleipner offers flexible installation to work with the space you have available. Our thruster models can be installed at any angle on the tunnel, to suit the space available on your vessel.