Name: Mass Sine 24V/800W battery converter
Brand: Mastervolt

FRENCHDAYS ➡️ -25€ from 200€ ⭐ -50€ from 400€ ⭐ -75€ from 600€ ➡️ Code: FRENCH24 ⏰ Ends 07/05/24, on a marked selection

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 15 may 2024

-€101.90

🐓 FRENCH DAYS

The Mass Sine 24V/800 (230V/50Hz) battery converter is suitable for intensive professional use, as well as demanding semi-professional and sports environments. They stand up to the toughest conditions and deliver exceptional performance, guaranteeing continuous operation 24 hours a day, if required.

With an MTBF (mean time between failures) of 180,000 hours of uninterrupted use, Mass range products are ideal for the most demanding missions and all circumstances requiring a reliable power supply.

MASTERVOLT - Mass Sine Battery Converter 24V/800W (230V/50Hz)

MASTERVOLT sinusoidal battery converters are silent and produce high-quality power economically and ecologically, up to 5000 W depending on the model.
They deliver power when you need it, on demand, unlike a generator which runs continuously. A converter is an excellent complement to a generator. What's more, it saves fuel, reduces engine running hours and lets you enjoy the peace and quiet on board.

The converter efficiently converts battery direct current (DC) into sinusoidal alternating current (AC). The Mass concept has long been field-proven. You can rely on its highly reliable, state-of-the-art components.

The Mass Sine 24V battery converter is available in several variations to best suit your needs:

24020800➔Mass Sine 24V/800W
24021500➔Mass Sine 24V/1500W
24022500➔Mass Sine 24V/2500W
24095100➔Mass Sine 24V/5000W


	REMOTE CONTROL AND MONITORING With an independent converter, you can choose the battery charging equipment. You can adapt these chargers according to the charging time you want. High efficiency and automatic economy mode keep digital clocks running smoothly and extend battery life. High-frequency technology prevents unpleasant noise and the ability to deliver high peaks meets power requirements. The Mass Sine comes with its own dedicated indicators. But you can also opt for a C4-RIremote control panel. The converter can also be controlled via the intuitive EasyView 5 display, by integrating the system into the MasterBus network with the MasterBus Inverter Interface or AC Power Analyser.

MASS SINE INVERTER Optimized for intensive use in professional and semi-professional environments Maximum capacity achieved at temperatures up to 40°C Puresinusoidal output prevents failures and damage to sensitive connected equipment Peak capacity for smooth start-up of complex, energy-intensive equipment MasterBus compatibility Ideal for mobile applications Professional connections guaranteed Automatic, reliable and secure operation Option available: Masterswitch / Systemswitch for automatic selection of the desired power source For further information, please refer to the installation and user manual at the bottom of this page

MASS SINE CONVERTER SPECIFICATIONS 24V/800W (230V/50 Hz)

Output voltage (±5%)	230V - 50Hz (± 0.01 Hz)
Output waveform	pure sine
Nominal battery voltage	24V
Recommended battery capacity	> 50 Ah
Peak power	1600 W
AC connection	internal
Galvanic isolation	yes
Technology	hF switching
Maximum ripple on DC current (battery)	5% RMS
Input current (nominal load)	36 A
Minimum DC fuse (slow blow)	63 A
Minimum cable cross-section	16 mm² minimum
Cos phi	all permissible power factors
Switching system	Masterswitch and Systemswitch
Cooling	natural/enhanced
Protection class	IP23
Protections	overtemperature, overload, short-circuit, high/low battery voltage
MasterBus compatible	yes, using MasterBus Converter interface or AC Power Analyzer