MASTERVOLT - Mass Sine Battery Converter 24V/800W (230V/50Hz)
MASTERVOLT sinusoidal battery converters are silent and produce high-quality power economically and ecologically, up to 5000 W depending on the model.
They deliver power when you need it, on demand, unlike a generator which runs continuously. A converter is an excellent complement to a generator . What's more, it saves fuel , reduces engine running hours and lets you enjoy the peace and quiet on board.
The converter efficiently converts battery direct current (DC) into sinusoidal alternating current (AC). The Mass concept has long been field-proven. You can rely on its highly reliable , state-of-the-art components .
The Mass Sine 24V battery converter is available in several variations to best suit your needs :
- 24020800➔ Mass Sine 24V/800W
- 24021500➔ Mass Sine 24V/1500W
- 24022500➔ Mass Sine 24V/2500W
- 24095100➔Mass Sine 24V/5000W
|
 |
REMOTE CONTROL AND MONITORING
With an independent converter, you can choose the battery charging equipment . You can adapt these chargers according to the charging time you want.
High efficiency and automatic economy mode keep digital clocks running smoothly and extend battery life. High-frequency technology prevents unpleasant noise and the ability to deliver high peaks meets power requirements.
The Mass Sine comes with its own dedicated indicators. But you can also opt for a C4-RI remote control panel . The converter can also be controlled via the intuitive EasyView 5 display , by integrating the system into the MasterBus network with the MasterBus Inverter Interface or AC Power Analyser .
|
|
MASS SINE INVERTER
- Optimized for intensive use in professional and semi-professional environments
- Maximum capacity achieved at temperatures up to 40°C
- Pure sinusoidal output prevents failures and damage to sensitive connected equipment
- Peak capacity for smooth start-up of complex , energy-intensive equipment
- MasterBus compatibility
- Ideal for mobile applications
- Professional connections guaranteed
- Automatic , reliable and secure operation
- Option available: Masterswitch / Systemswitch for automatic selection of the desired power source
For further information, please refer to the installation and user manual at the bottom of this page
|
 |
|
MASS SINE CONVERTER SPECIFICATIONS 24V/800W (230V/50 Hz)
| Output voltage (±5%) |
230V - 50Hz (± 0.01 Hz) |
| Output waveform |
pure sine |
| Nominal battery voltage |
24V |
| Recommended battery capacity |
> 50 Ah |
| Peak power |
1600 W |
| AC connection |
internal |
| Galvanic isolation |
yes |
| Technology |
hF switching |
| Maximum ripple on DC current (battery) |
5% RMS |
| Input current (nominal load) |
36 A |
| Minimum DC fuse (slow blow) |
63 A |
| Minimum cable cross-section |
16 mm² minimum |
| Cos phi |
all permissible power factors |
| Switching system |
Masterswitch and Systemswitch |
| Cooling |
natural/enhanced |
| Protection class |
IP23 |
| Protections |
overtemperature, overload, short-circuit, high/low battery voltage |
| MasterBus compatible |
yes, using MasterBus Converter interface or AC Power Analyzer |
MAIN POINTS :
- Weight: 3.8 kg
- LED display
- Voltage: 24 V
- Output voltage: 230V
- Power rating: 800W
- Standards: CE, E-mark, ABYC A-31
- Dimensions (h x w x d): 325 x 220 x 111 mm
|
BOX CONTENTS :
- 1 - Mass Sine 24V/800W converter (230V/50Hz)
- 1 - PDF documentation
|
