Name: Flybridge V2 dual station switch kit for flaps Lenco
Brand: Lenco

☀️ Garmin spring offer ☀️ Up to -38% off a selection ⏰ ends 04/30/24

⚡️ Get up to €500 back on your SIMRAD or B&G equipment ⏰ From 01/04/2024 to 31/05/2024.

-€36.66

The Flybridge V2 switch kit is a secondary switch that connects to the main one and is used in another part of the boat or in the 2nd cockpit. This kit can't be used on its own: use it in conjunction with a V2 switch to add a secondary control station.

The V2 secondary switch is available in 2 models:

LC243: With flap positionLED, 6m extension cable and Y connector.
123FB30-V2: With flap position LED , 9m extension and Y connector.

The flap position is controlled by an LED keypad, which allows you to know the position of the shovels at all times. This range of secondary switches is compatible with V2 main switches only (with external control box).

⚠️ Not compatible with ISK switch.

LENCO - V2 FLYBRIDGE DUAL STATION KIT - V2 SECONDARY SWITCH

The V2 secondary kit for flaps Lenco allows quick and easy control of your flaps from the boat's secondary cabin. At the touch of a button, you can independently manage your flaps, raising or lowering it.


	V2 FLYBRIDGE SWITCH FOR SECONDARY CABIN The V2 Lenco LED secondary switch, supplied with a 6m or 9m extension lead, is compatible with any main switch in the V2 range (not to be confused with the ISK range) The V2 flybridge second station switch allows the addition of a flap control keypad in the secondary helm station or any other room on the boat.

THE V2 SECOND STATION SWITCH KIT The V2 Lenco LED switch kit for the secondary station comes with a 6m or 9m extension lead and a Y connector. This will enable you to connect your V2 main switch for single or double cylinder flaps to its external management box and to the flybridge secondary switch (you can find 16m extensions here if you need more distance between the 2 switches)

How to choose your secondary switch kit?

	LC242	LC244	LC247	LC248	123FB20-V2	123FB30-V2
LED indicating flap position	✅	✅	❌	❌	✅	✅
For which switch?	ISK	ISK	ISK	ISK	V2	V2
Extension length	6 meters	9 meters	6 meters	9 meters	6 meters	9 meters
Mounting diameter	5.24 cm
Installation depth	~6.5cm
Interface dimension	7x7 cm